Fixing Setup Errors of Linksys RE7000 Extender

So when you tried to do the Linksys RE7000 setup for the first time but are getting errors, probably wrong details are entered. Or you might have just skipped some process step? This happens when there is either ignorance of the instruction or lack of the accuracy of details filled in. So use the following points that we are going to tell you, and verify them to fix your setup error. The second most common error is that perhaps the extender is placed really far from the existing router, so you should place it near the router during the process. Or there can also be a blocking device nearby distorting signals. 

So check that the site you have selected is free from metallic and electrical appliances, and furthermore, it needs to be away from thick concrete walls which may weaken your signal strength. Besides, there must be an adequate signal strength from the extender to the router to the device, whether wired or wireless. The important thing to remember here is that you must have to use the default login and all other credentials since you are setting up the extender for the first time. And in case of persistent errors, reset the extender to factory mode, and set it up again.